top of page
Picture1_edited.jpg
DEMA WALL MOUNTED CONCENTRATE FOAMER

DEMA WALL MOUNTED CONCENTRATE FOAMER

SKU: FI-WC-SS-E
£995.00Price
Excluding VAT
  • Draws from concentrated product
  • Dilutes at ratios of 14:1 to 320:1
  • Powered by compressed air
  • Stainless steel ball valve and wand
  • Stainless steel fluid fittings
  • Quick-change pump
  • Consistent, reliable dilution rates, regardless of changes in water pressure
Please note: There is a 7 - 10 days delivery on all Dema products.

  • SPECIFICATIONS

    COMPRESSED AIR REQUIREMENTS 40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
    WATER REQUIREMENTS 10-100 psi (0.69-6.9 bar)
    Backflow prevention is required – consult local plumbing ordinances for more information.
    LIQUID TEMPERATURE RANGE 40-100˚F (4.4-37˚C)
    CHEMICAL COMPATIBILITY Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
    POWER TYPE Compressed air
    CHEMICAL PICKUP TYPE Draws from concentrated product
    DILUTION RATIO RANGE (WATER:CHEMICAL)* 14:1 to 320:1
    NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) One product
    SUCTION LINE LENGTH/DIAMETER 8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter
    DISCHARGE HOSE DIAMETER/LENGTH 50 ft. (15 m) hose, with 3/4 in. (19 mm) inside diameter)
    DISCHARGE WAND/TIP TYPE 7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
    OUTPUT DISTANCE 25-30 ft. (7-9 m)
    OUTPUT VOLUME 20-45 gal/min (75-170 l/min) of foam
    FLOW RATE* 2 gal/min (7.6 l/min))
    PUMP SEALS Santoprene, Viton, or Kalrez

    *Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

bottom of page